Commercial plumbing problems can occur at any time and quickly turn into costly repairs, operational downtime, and unhappy customers. Instead of simply reacting to emergencies, take proactive action by enrolling in commercial plumbing maintenance plans. These maintenance plans keep the systems a business relies on running efficiently.

At Ironwood Plumbing, we understand the importance of taking preventive measures to best protect your business or property. For that reason, we offer personalized commercial plumbing maintenance plans. These annual and biannual plans offer many benefits. In this article we will analyze some key aspects of our plans and also the benefits they provide.

Biannual commercial plumbing maintenance plans offer inspections and services twice a year. These plans are best for restaurants, hospitals, hotels, schools, factories, and other large buildings where plumbing is used heavily.

During a biannual maintenance visit, our technicians will complete the following inspections:

1. Full System Inspection:

The goal of this inspection is to identify common issues such as corrosion, leaks, water pressure issues, or wear before failure. In order to do so, our technicians inspect the entire system, including:

• Water supply lines
• Drain, waste, and vent piping
• Valves and shutoffs
• Pressure regulators
• Backflow preventers
• Pipe supports and insulation

2. Leak Detection:

Even small leaks can cost thousands of dollars in water loss and structural damage. To minimize the risk of a leak, our biannual checks include:

• Visual inspection of exposed piping
• Meter-based leak detection
• Fixture leak checks

3. Drain and Sewer System Maintenance:

Regular inspection and maintenance of these systems prevent backups, odors, and sanitary issues. As a part of our commercial plumbing maintenance plans we offer:

• Camera inspection of main sewer lines
• Snaking and/or hydro jetting as needed
• Floor drain clearing
• Grease trap and line checks (for commercial kitchens and restaurants)

4. Water Heater and Boiler Maintenance:

Water heaters and boilers provide hot water and heating. To ensure proper function and consistent hot water, regular inspections are essential. For example, during our services we check:

• The entire unit for possible sediment buildup
• Burner or heating elements
• Temperature and pressure relief valves
• Gas supply connections
• The water tank, and do a complete flushing when needed

5. Fixture Performance Testing:

Large buildings and offices have multiple fixtures that need to be inspected to ensure function. We inspect and test:

• Toilets
• Urinals
• Faucets
• Mixing valves
• Flush valves
• Sensor fixtures and more

6. Water Pressure and Flow Testing:

Too high or too low water pressure can cause damage to pipes and affect water bills. Our trained technicians measure:

• Building water pressure
• Fixture flow rates
• Pressure regulator function

7. Backflow Prevention Testing:

Backflow devices are required by law for many commercial properties. These devices are essential to protect drinking water from contamination. During our biannual maintenance we: 

• Test backflow assemblies
• Review certification documentation
• Repair or rebuild if failed

8. Sump Pumps (If Present):

Sump pumps are a critical piece of equipment for buildings with basements or underground plumbing systems. Our services include:

• Float switch testing
• Pump cycle testing
• Pit cleaning
• Alarm system check

9. Emergency Shutoff Verification:

Having a reliable emergency water shutoff reduces damage during emergencies. As part of our commercial plumbing maintenance plans we ensure that:

• Main shutoff valves operate properly
• Zone valves are labeled
• Staff know shutoff locations

10. Maintenance Report:

After all our inspections we provide a full report including:

• An inspection checklist
• Issues found
• Recommended repairs
• All compliance documentation

An annual maintenance plan is usually a lighter version of the above services and is performed once per year. We recommend this type of maintenance plan for buildings with low to moderate usage such as offices, retail stores and small commercial spaces.

During an annual maintenance visit our technicians will do the following:

• General System Inspection
• Detailed Leak Check
• Drain Maintenance (Snaking or Hydro jetting)
• Water Heater Service
• Fixture and Pipe Maintenance
• Pressure Checks
• Complete Maintenance Report

Some maintenance plans also include:

• Pipe descaling
• Grease trap cleaning
• Water filtration services
• Storm drain cleaning
• Legionella prevention programs

Commercial plumbing maintenance plans provide clear benefits:

• Cost Savings: Catch minor leaks and corrosion before they become expensive failures.
• System Longevity: Extend the lifespan of expensive equipment.
• Compliance & Safety: Ensure systems meet local codes and regulations.

With many maintenance plans your business also receives priority for emergency calls. Contact Ironwood Plumbing for more information about our commercial plumbing maintenance plans. We look forward to working with you!

Follow us on Facebook, Instagram, and X for more information.